SUB10 PRO
The Sub10 PRO is a compact active subwoofer with a 10-inch fiber-reinforced paper woofer, Class D amplification and DSP, made for stereo, LFE and wide-range monitoring setups in studios. It supports room calibration through ADAM Control and Sonarworks SoundID Reference.
- 10" fiber-reinforced paper woofer, Class D amplifier
- Frequency response 21 – 300 Hz at -6 dB
- Max peak SPL 113 dB with IEC-weighted noise (full range)
- Stereo, LFE and Wide operating modes
- AES3 digital plus XLR/TRS analog I/O, Ethernet control
- ADAM Control and Sonarworks SoundID Reference calibration
Φωτογραφίες
5Αγγελίες
Δεν υπάρχουν ακόμα αγγελίες για αυτό το μοντέλο
Όταν κάποιος πουλήσει ένα SUB10 PRO, οι αγγελίες και το ιστορικό πωλήσεων θα εμφανίζονται εδώ.
Πούλησε ένα τέτοιοΠεριγραφή
The Sub10 PRO is a front-fired, front-ported active subwoofer built around a high-excursion 10-inch woofer with a fiber-reinforced paper cone. A Class D amplifier and onboard DSP drive it, and the bass port was shaped using finite element analysis to keep distortion low at high levels. The cabinet is vinyl-wrapped MDF with a painted MDF front panel and a metal grille.
Three operating modes (Stereo, LFE and Wide) allow use in conventional 2.1 systems, immersive and multichannel setups, or full-range applications. The backplate offers level, phase and bass management controls, input selection, and a footswitch/TRS bypass. Over the network, ADAM Control provides 4-band parametric EQ, adjustable crossover and delay, and loads Sonarworks SoundID Reference calibration profiles and firmware updates.
Connections are 2 x XLR/TRS combi analog inputs, an AES3 digital input, 2 x XLR analog outputs, an AES3 digital output and an RJ45 Ethernet port using AES70 over TCP. The warranty is 2 years, extendable to 5 years with product registration.
Βίντεο
Προδιαγραφές
- Μάρκα
- ADAM Audio
- Μοντέλο
- SUB10 PRO
- Κατηγορία
- Στούντιο › Ηχεία studio
Audio Connectors
- Analog inputs
- 2 x XLR / TRS combi
- Digital input
- XLR AES3
- Analog input impedance
- 25 kOhm
- Digital input impedance
- 110 Ohm
- Max. input level
- +19 dBu
- Analog outputs
- 2 x XLR
- Digital outputs
- XLR AES3
Connectivity
- Networking connector
- RJ45
- Connection type
- Ethernet
- Communication protocol
- AES70 / TCP
- Control software
- ADAM Control (Windows and MacOS available)
- Third-party calibration
- Sonarworks SoundID Reference
Acoustics
- Frequency response @ -3 dB
- 22 – 264 Hz
- Frequency response @ -6 dB
- 21 – 300 Hz
- Crossover frequencies
- 70, 85, 100, 115 Hz (variable via ADAM Control)
- Max peak SPL, IEC-weighted noise (full range)
- 113 dB SPL
- Max peak SPL, IEC-weighted noise (85 Hz bass managed)
- 114 dB SPL
- Max SPL 50–100 Hz avg @ 3% THD (RMS / Peak)
- 106 dB SPL / 110 dB SPL
Driver and Amplification
- Basket diameter
- 10″
- Voice coil diameter
- 1 3/4″ (45 mm)
- Cone material
- Paper, fiber-reinforced
- Amplifier type
- PWM
- RMS (1% THD, limiter deactivated)
- 200 W @ 3 Ohm
- Peak (10% THD, limiter deactivated)
- 325 W
Signal Processing
- AD converter
- 24-bit (via XLR/TRS inputs)
- Internal sample rate
- 96 kHz
- Delay range and resolution
- 0 – 10 ms, 32-bit
- Advanced room adaptation
- 4-bands QEQ
Backplate Controls
- Level
- -18 dB to +6 dB
- Input selection
- Analog, digital
- Bass management
- 70, 85, 100, 115 Hz
- Operational modes
- Remote Control, Local / Stereo, LFE (<120Hz), Wide
- Bypass
- Yes, via footswitch (not included) and TRS connection (latched)
Power
- Power consumption (max, standby)
- 450 W, 2.5 W
- AC input voltage
- 100 – 240 V, 50/60 Hz
Physical
- Cabinet design
- Front Fire and front ported
- Cabinet material
- Vinyl wrapped MDF and painted MDF front panel
- Dimensions (H x W x D)
- 450 mm x 360 mm x 450 mm (17 3/4″ x 14 1/8″ x 17 3/4″)
- Weight
- 22.8 kg (50 lbs 4 oz)
- Operating conditions
- -10° C to +40° C; <75% RH, non-condensing
- Warranty
- 5 years (2 years plus 3 years optional with product registration)
In the box
- Delivery contents
- Sub10 PRO subwoofer, power cable, Quick Start Guide