Speaker Cranker
The Speaker Cranker is a discrete, all-analog overdrive pedal that adds grit and a slight boost to a guitar signal without changing its basic tone. It is aimed at players who want the effect of an extra preamp tube in their amp. The maker lists it as no longer in production.
- Discrete, all-analog overdrive, not a booster
- Single control: More (amount of dirt)
- True bypass with relay-based switching
- 9 V battery or 9 V DC, 2.1 mm negative centre
- Draws 10 mA
- Listed by the maker as no longer in production
Φωτογραφίες
6Αγγελίες
Δεν υπάρχουν ακόμα αγγελίες για αυτό το μοντέλο
Όταν κάποιος πουλήσει ένα Speaker Cranker, οι αγγελίες και το ιστορικό πωλήσεων θα εμφανίζονται εδώ.
Πούλησε ένα τέτοιοΠεριγραφή
The Speaker Cranker is built to add distortion rather than act as a clean boost. It is described as working like an additional preamp tube in an amplifier: single notes pick up harmonics and a tube-like sag, power chords become thicker and more ragged, and complex chords stay distinct. The circuit is meant to leave the low end, mids and top end as they were, so the pedal does not add shimmer or sparkle.
There is one control, More, which sets the amount of dirt. The pedal is true bypass and uses electronic relay-based switching, so no audio passes when it has no power. The input impedance is 2.2 MΩ and the output impedance is below 10 kΩ.
Power comes from a 9 V battery or a 9 V DC supply with a 2.1 mm negative-centre barrel, drawing 10 mA. The maker recommends pedal-specific, transformer-isolated supplies and warns against running it at higher voltages. The enclosure measures 121 x 64 x 57 mm including the knobs.
Βίντεο
Προδιαγραφές
- Μάρκα
- EarthQuaker Devices
- Μοντέλο
- Speaker Cranker
- Κατηγορία
- Εφέ και πετάλια
Controls
- More
- Controls the amount of dirt
Audio
- Circuit
- Discrete, all-analog
- Effect type
- Overdrive (distortion enhancement, not a booster)
- Input impedance
- 2.2 MΩ
- Output impedance
- <10 kΩ
Switching
- Bypass
- True bypass
- Switching type
- Electronic relay-based
- Power off behaviour
- Audio will not pass without power
Power
- Battery
- 9 V
- DC supply
- 9 V DC, 2.1 mm barrel, negative centre
- Current draw
- 10 mA
- Maximum voltage
- Do not run at higher voltages than 9 V
Physical
- Dimensions (with knobs)
- 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm)
Status
- Production status
- No longer in production