Ripped Speaker
Analog fuzz pedal for guitar and bass that covers lo-fi, broken-speaker style fuzz at low settings and heavy saturated fuzz when turned up. A bias control shapes gating and clipping, and an active tilt-style tone control adjusts brightness.
- Analog mono fuzz for guitar and bass
- RIP bias knob for gating and clipping character
- Active tilt-shift TONE control, flat at noon
- True bypass switching with LED
- 9V battery included; draws 10mA
- Compact size: 4.5 x 2.75 x 2.1 in
Φωτογραφίες
7Αγγελίες
Δεν υπάρχουν ακόμα αγγελίες για αυτό το μοντέλο
Όταν κάποιος πουλήσει ένα Ripped Speaker, οι αγγελίες και το ιστορικό πωλήσεων θα εμφανίζονται εδώ.
Πούλησε ένα τέτοιοΠεριγραφή
The Ripped Speaker is a mono analog fuzz pedal inspired by early distorted guitar and bass sounds, such as those from a damaged speaker cone, a loose tube or a faulty console channel. Low fuzz settings give a lo-fi, vintage character, while higher settings produce a fully saturated, modern fuzz.
Four knobs control the sound: Vol sets output level, Fuzz sets the input gain into the fuzz circuit, Tone is an active tilt-shift EQ that is flat at noon, darker and bassier counterclockwise and brighter with less low end clockwise. The Rip knob is a bias control that sets clipping at the top and bottom of the waveform. Noon is the most open and least compressed position; turning it either way gives gated, sputtering or choked textures, with clockwise producing a harder gate and counterclockwise a smoother fade-out.
The pedal uses true bypass switching with an LED status indicator. It has a 1/4" input (1MΩ) and a 1/4" output (100Ω), runs on an included 9V battery, and can also be powered from an optional EHX 9.6VDC-200mA adapter, which is sold separately.
Βίντεο
Προδιαγραφές
- Μάρκα
- Electro-Harmonix
- Μοντέλο
- Ripped Speaker
- Κατηγορία
- Εφέ και πετάλια
Controls
- Volume knob
- Adjusts output volume
- Rip knob
- Bias control for clipping at top and bottom of the waveform
- Tone knob
- Active tilt-shift EQ, flat at noon
- Fuzz knob
- Input gain into the fuzz circuit
- Footswitch
- Toggles effect and true bypass
- Indicator
- LED lights when effect is engaged
Inputs
- Input jack
- 1/4"
- Input impedance
- 1MΩ
Outputs
- Output jack
- 1/4"
- Output impedance
- 100Ω
Audio
- Circuit
- Analog
- Bypass
- True Bypass
- Audio
- Mono
Power
- Power supply
- 9V battery included (optional 9.6VDC-200mA power adapter not included)
- Current draw
- 10mA
Physical
- Dimensions (in)
- 4.5 x 2.75 x 2.1
In the box
- Battery
- 9V battery included