FA302iC
The FA302iC is a two-way co-axial in-ceiling or in-wall loudspeaker with a 200mm (8") multi-fibre bass/midrange driver and a 25mm polyester dome tweeter on a steerable pod. It suits custom-install and home theatre setups where a flush, paintable speaker is wanted.
- 200mm multi-fibre bass/midrange with 25mm co-axial dome tweeter
- Steerable tweeter pod for directing the sound
- Frequency response 37Hz - 28kHz (-6dB, in room)
- 8 Ohm, 90dB sensitivity, 60W RMS continuous
- Cut-out diameter 248mm, clamp travel 5 - 50mm
- Paintable magnetic grille, round or optional square
Φωτογραφίες
6Αγγελίες
Δεν υπάρχουν ακόμα αγγελίες για αυτό το μοντέλο
Όταν κάποιος πουλήσει ένα FA302iC, οι αγγελίες και το ιστορικό πωλήσεων θα εμφανίζονται εδώ.
Πούλησε ένα τέτοιοΠεριγραφή
The FA302iC is a home-install loudspeaker built around a 200mm multi-fibre bass/midrange cone with a FyneFlute roll surround and a 25mm soft dome polyester tweeter mounted co-axially. The tweeter pod can be angled to direct the sound, and the crossover is tuned for placement in a ceiling or wall. It is derived from the maker's larger F300 series models and is specified to reach below 40Hz.
Installation is handled with easy-to-fit clamps, spring cable terminals and a supplied cut-out template. The cut-out diameter is 248mm and the clamp range covers surfaces 5 to 50mm thick, with 112.5mm of depth needed behind the mounting surface. A low-profile magnetic grille sits almost flush with the surface and can be painted to match the room. A round grille is standard and a square grille is available as an optional extra.
The speaker is rated for 8 ohm nominal impedance and 90dB sensitivity, with recommended amplifier power of 25 to 120 W RMS. It connects to an amplifier through the spring terminals, and a manual and cut-out template are offered as downloads.
Προδιαγραφές
- Μάρκα
- Fyne Audio
- Μοντέλο
- FA302iC
- Κατηγορία
- Hi-Fi και οικιακός ήχος › Ηχεία
Audio
- System type
- 2 way co-axial loudspeaker for in ceiling or in wall application, steerable HF unit
- Drive unit complement
- 1 x 200mm multi-fibre bass / midrange cone, FyneFlute surround with 25mm Co-axial polyester dome tweeter
- Frequency response (-6dB typical in room)
- 37Hz - 28kHz
- Sensitivity (2.83 Volt @ 1m)
- 90dB
- Nominal impedance
- 8 Ohm
- Crossover frequency
- 2.8kHz
- Crossover type
- Passive 2nd order low pass, 1st order high pass
- Suggested min volume
- 15 L
Power
- Recommended amplifier power (Watt RMS)
- 25 - 120
- Peak power handling (Watt)
- 240
- Continuous power handling (Watt RMS)
- 60
Physical
- Dimensions - Dia x Depth
- 273 x 115mm (10.7 x 4.5")
- Square grille dimensions
- 281 x 281mm (11.1 x 11.1")
- Round grille diameter
- 281mm (11.1")
- Net weight - each
- 2.1kg (4.7lbs)
Installation
- Cut-out diameter
- 248mm (9.8")
- Depth behind mounting surface
- 112.5mm (4.4")
- Clamp travel
- 5 - 50mm (0.2 - 2.0")
- Grille options
- Round Grille; Square Grille - Optional Extra
- SKU
- F8000028
Downloads
- Documents
- FA300iC and FA500iC Manual; FA302iC and FA502iC Cutout Template