Ci160.2CS
The Ci160.2CS is a 6.5-inch round-baffle in-wall speaker from KEF's Ci-C architectural range, built around a Uni-Q coaxial driver array. It suits custom-installation projects where mounting depth is limited and the speaker should be unobtrusive.
- 160 mm (6.5 in.) Uni-Q coaxial driver array
- 16 mm aluminium dome tweeter with tangerine waveguide
- Mounting depth of 84.5 mm from the surface
- IP64 certified, weather-resistant treatment
- Magnetic, paintable grille and bezel
- 52 Hz-20 kHz (±6 dB), 89 dB sensitivity, 8 ohm
Φωτογραφίες
8Αγγελίες
Δεν υπάρχουν ακόμα αγγελίες για αυτό το μοντέλο
Όταν κάποιος πουλήσει ένα Ci160.2CS, οι αγγελίες και το ιστορικό πωλήσεων θα εμφανίζονται εδώ.
Πούλησε ένα τέτοιοΠεριγραφή
The Ci160.2CS is an in-wall speaker in KEF's Ci-C Series, the entry point to the maker's custom-installation line. It uses a Uni-Q driver array in which a 16 mm aluminium dome tweeter sits at the acoustic centre of a 160 mm bass/midrange cone, so both drivers work as a single point source and spread sound evenly across the room.
The cabinet is open-backed and has a shallow mounting depth of 84.5 mm from the surface, which allows installation in places where deeper speakers would not fit. A magnetic grille and ultra-thin bezel keep the front nearly flush, and both the grille and the bezel can be painted to match the wall or ceiling.
The speaker has weather-resistant treatment against moisture and UV light and is IP64 certified. It is a passive 8 ohm design, recommended for use with amplifiers rated 10-100 W, and connects to an external amplifier. Further details are listed on the maker's Ci software download page.
Προδιαγραφές
- Μάρκα
- KEF
- Μοντέλο
- Ci160.2CS
- Κατηγορία
- Hi-Fi και οικιακός ήχος › Ηχεία
Audio
- Frequency response
- 52Hz-20kHz (+/-6dB) open-backed
- Sensitivity
- 89dB (2.83V/ 1m)
- Nominal impedance
- 8 Ohms
- Recommended amplifier power
- 10-100W
- Low-frequency driver
- 160mm (6.5in.) Uni-Q
- High-frequency driver
- 16mm (0.6in.)
- Tweeter
- 16mm (0.6in.) Aluminium dome tweeter with tangerine waveguide
Features
- Bezel
- UTB™ Ultra-Thin Bezel
- Driver array
- 160mm (6.5in.) Uni-Q driver
- Grille
- Magnetic grille
- Finish
- Paintable grille and bezel
- Weather resistance
- Weather Resistant
- Ingress protection
- IP64 certified
Physical
- Cut-out dimensions (H x W)
- 194 mm x 194 mm (7.64 in. x 7.64 in.)
- Mounting depth from surface
- 84.5mm (3.33in.)
- External dimensions (H x W x D)
- 223 mm x 223 mm x 88.7 mm (8.78 in. x 8.78 in. x 3.49 in.)
- Net weight
- 1.5kg (3.3lbs)
Series
- Range
- Ci-C Series
- Type
- Architectural Speakers