536· Ενισχυτές
Monaural power amplifier from Mark Levinson's Pure Path line, rated at 400 W per channel into 8 ohms and 800 W into 4 ohms. Intended for stereo systems that use one amplifier per loudspeaker, fed from a balanced or single-ended preamplifier.
- 400 W per channel into 8 ohms, 800 W into 4 ohms
- Stable into 2-ohm loads
- Balanced and single-ended inputs
- Pure Path discrete, direct-coupled monaural signal path
- Ethernet, RS-232, USB and 12V trigger control
- Designed and handcrafted in the USA
Φωτογραφίες
8Αγγελίες
Δεν υπάρχουν ακόμα αγγελίες για αυτό το μοντέλο
Όταν κάποιος πουλήσει ένα 536, οι αγγελίες και το ιστορικό πωλήσεων θα εμφανίζονται εδώ.
Πούλησε ένα τέτοιοΠεριγραφή
The Nº 536 is a fully discrete, fully differential, direct-coupled monoblock amplifier. It is rated at 400 W RMS into 8 ohms and 800 W into 4 ohms, and it is stable into 2-ohm loads. The output stages run in class A for most listening conditions, within a class-AB architecture. A custom toroidal transformer with separate secondary windings for each output stage supplies the power.
The circuit uses folded cascodes built from JFET and bipolar transistor pairs, a high bias current and very little negative feedback. Critical gain-setting and feedback resistors are tantalum nitride thin-film types, and critical filtering uses film capacitors. The chassis is 6000-series extruded aluminum, and the amplifier is designed and handcrafted in the USA.
There is one balanced and one single-ended input. Two pairs of Hurricane binding posts allow standard or bi-wired speaker connection. For system integration it offers Ethernet/IP, RS-232, 12V trigger in and out, and USB for monitoring and configuration through a built-in web page.
Βίντεο
Προδιαγραφές
- Μάρκα
- Mark Levinson
- Μοντέλο
- 536
- Κατηγορία
- Hi-Fi και οικιακός ήχος › Ενισχυτές
Inputs
- Input connectors
- One balanced, one single-ended
- Input impedance
- 60 kΩ balanced; 30 kΩ unbalanced
- Input sensitivity
- 2.83 VRMS output at 142 mVRMS input
Outputs
- Speaker connectors
- Two pairs of Hurricane loudspeaker outputs
- Rated output power
- 400 wpc RMS @ 8 Ω, 20 Hz to 20 kHz @ <0.3% THD, full output from 2.83 VRMS
- Power into 4 ohms
- 800 wpc
- Load stability
- 2-ohm stable
Audio
- Frequency response
- 10 Hz to 20 kHz ±0.2 dB
- Signal-to-noise ratio
- >85 dB, reference level 2.83 VRMS
- Voltage gain
- 26 dB
- Operating class
- Class-AB architecture, class A for most listening conditions
Connectivity
- Control I/O
- Ethernet, RS-232, Trigger In and Out, USB-A, Mini USB
- Trigger
- 12V input and output
Power
- Power requirements
- 100V~, 120V~, 230V~, factory set for destination country, 1500W
Physical
- Height (with feet)
- 7.75" (19.7 cm)
- Height (without feet)
- 7" (17.8 cm)
- Width
- 17.75" (45.1 cm)
- Depth
- 20" (50.8 cm)
- Net weight
- 100 lbs (45.4 kg)
- Shipping weight
- 114 lbs (51.7 kg)
- Chassis
- 6000-series aluminum