M22 V2
The M22 V2 is a stereo power amplifier from NAD that delivers 300 W per channel into 8 or 4 ohms and can be bridged to mono for 900 W. It suits hi-fi systems that need a high-power, low-distortion amplifier stage. The model is listed as archived and no longer sold.
- 300 W per channel into 8 and 4 ohms (stereo)
- Bridge mode: 900 W into 8 ohms
- THD+N below 0.005%
- Damping factor above 800
- Auto trigger from 5 mV input signal
- Standby power below 0.5 W
Φωτογραφίες
5Αγγελίες
Δεν υπάρχουν ακόμα αγγελίες για αυτό το μοντέλο
Όταν κάποιος πουλήσει ένα M22 V2, οι αγγελίες και το ιστορικό πωλήσεων θα εμφανίζονται εδώ.
Πούλησε ένα τέτοιοΠεριγραφή
The M22 V2 is a two-channel power amplifier. In stereo mode it supplies 300 W per channel into 8 ohms and 4 ohms from 20 Hz to 20 kHz at 0.1% THD with both channels driven. In bridge mode it can be run as a mono amplifier rated at 900 W into 8 ohms. IHF dynamic power in stereo mode is 400 W into 8 ohms.
Measured performance is specified as THD+N below 0.005% from 250 mW to 290 W, a signal-to-noise ratio above 100 dB (A-weighted, referenced to 1 W in 8 ohms) and a damping factor above 800. Frequency response is flat to within ±0.1 dB from 20 Hz to 20 kHz. Input sensitivity for full 300 W output into 8 ohms is 1.73 V, and the gain level is listed as 19 dB (Low).
The amplifier includes an auto-trigger function that responds to an input signal of 5 mV at 1 kHz, and standby consumption is under 0.5 W. It measures 435 x 103 x 379 mm and weighs 8.9 kg. Manuals in several languages, a quick setup guide, a data sheet and a HybridDigital white paper are available as downloads.
Βίντεο
Προδιαγραφές
- Μάρκα
- NAD
- Μοντέλο
- M22 V2
- Κατηγορία
- Hi-Fi και οικιακός ήχος › Ενισχυτές
Audio
- Continuous output power, stereo (8 and 4 ohms)
- 300 W (20 Hz-20 kHz at 0.1% THD, both channels driven)
- Continuous output power, bridge mode (8 ohms)
- 900 W (20 Hz – 20 kHz at 0.1% THD)
- THD+N
- <0.005 % (250 mW to 290W, 8 ohms and 4 ohms)
- Signal-to-noise ratio
- >100 dB (A-weighted, ref. 1 W in 8 ohms)
- Clipping power, stereo (1 kHz, 8 ohms, 0.1% THD)
- >300 W
- Clipping power, bridge (1 kHz, 8 ohms, 0.1% THD)
- >950 W
- IHF dynamic power, stereo (1 kHz, 1% THD)
- 8 ohms: 400 W
- Damping factor
- >800 (ref. 8 ohms)
- Frequency response
- ±0.1 dB (20 Hz - 20 kHz)
- Input sensitivity (for 300 W in 8 ohms)
- 1.73 V
- Gain level
- Low: 19 dB
Power
- Minimum input level for auto trigger
- 5 mV at 1 kHz
- Standby power
- <0.5 W
Physical
- Gross dimensions (W x H x D)
- 435 x 103 x 379 mm
- Net weight
- 8.9 kg (19.6 lbs)
- Shipping weight
- 15 kg (33.1 lbs)