KMR 82 i
The KMR 82 i is a long shotgun microphone with a pressure-gradient interference transducer and a 45° lobe-shaped pickup pattern. It is aimed at ENG, theatre and stage dialogue, and picking out soloists or instruments from a distance.
- 45° lobe-shaped pickup pattern
- Self-noise 12 dB-A, 82 dB S/N (A-weighted)
- Max SPL 128 dB for 0.5% THD
- Switchable low cut (120 Hz) and treble filter
- 250 g, 395 mm long, 21 mm diameter
- 48 V phantom power, 0.7 mA draw
Φωτογραφίες
6Αγγελίες
Δεν υπάρχουν ακόμα αγγελίες για αυτό το μοντέλο
Όταν κάποιος πουλήσει ένα KMR 82 i, οι αγγελίες και το ιστορικό πωλήσεων θα εμφανίζονται εδώ.
Πούλησε ένα τέτοιοΠεριγραφή
The KMR 82 i pairs a pressure-gradient condenser capsule with a long interference tube to give a narrow 45° acceptance angle. Its lobe pattern is described as frequency-independent, so off-axis sound is reduced in level without added coloration. This makes it easy to combine with other microphones. The response is linear up to 2 kHz, with a broad treble lift that offsets high-frequency loss over longer distances.
Self-noise is 12 dB-A, sensitivity is 21 mV/Pa and the maximum SPL is 128 dB for 0.5% THD. A high-pass filter reduces wind and handling noise. A low cut switch moves the filter to 120 Hz to offset proximity effect at shorter distances, and a second switch applies an electronic filter that offsets the capsule's treble boost to avoid sibilance on close speech.
The microphone weighs 250 g, has a balanced centre of gravity and draws only 0.7 mA from 48 V phantom power. It connects through an XLR 3 F connector. It is offered in nickel (KMR 82 i) and black (KMR 82 i mt) versions, each supplied with a WS 82 windscreen.
Βίντεο
Προδιαγραφές
- Μάρκα
- Neumann
- Μοντέλο
- KMR 82 i
- Κατηγορία
- Στούντιο › Μικρόφωνα
Audio
- Acoustical operating principle
- Pressure gradient interference transducer
- Directional pattern
- Supercardioid/lobe
- Pickup angle
- 45°
- Frequency range
- 20 Hz ... 20 kHz
- Sensitivity at 1 kHz into 1 kohm
- 21 mV/Pa ± 1 dB
- Equivalent noise level, CCIR
- 23 dB
- Equivalent noise level, A-weighted
- 12 dB-A
- Maximum SPL for THD 0.5%
- 128 dB
- Signal-to-noise ratio, CCIR (re. 94 dB SPL)
- 71 dB
- Signal-to-noise ratio, A-weighted (re. 94 dB SPL)
- 82 dB
Outputs
- Rated impedance
- 150 ohms
- Rated load impedance
- 1 kohms
- Maximum output voltage
- 2.6 dBu
- Matching connector
- XLR 3 F
Power
- Supply voltage (P48, IEC 61938)
- 48 V ± 4 V
- Current consumption (P48, IEC 61938)
- 0.7 mA
Physical
- Weight
- 250 g
- Diameter
- 21 mm
- Length
- 395 mm
- Colour options
- Nickel (KMR 82 i), black (KMR 82 i mt)
In the box
- Microphone
- KMR 82 i or KMR 82 i mt
- Windscreen
- WS 82