twotwo sub2
Active subwoofer for PMC's twotwo nearfield monitors, with a 250 mm long-throw driver, ATL bass loading and 600 W of Class-D amplification. Suited to 2.1 stereo setups and LFE duty in surround, broadcast or post-production rooms.
- 250 mm (9.8 in) carbon-fibre/Nomex long-throw driver
- 600 W rms built-in Class-D amplifier
- ATL bass loading, 3 m effective line length
- Balanced analogue L/R XLR inputs plus AES3 digital XLR input
- AES3 input accepts 32 to 192 kHz sample rates
- Single parametric EQ; optional rc1 remote
Φωτογραφίες
5Αγγελίες
Δεν υπάρχουν ακόμα αγγελίες για αυτό το μοντέλο
Όταν κάποιος πουλήσει ένα twotwo sub2, οι αγγελίες και το ιστορικό πωλήσεων θα εμφανίζονται εδώ.
Πούλησε ένα τέτοιοΠεριγραφή
The twotwo sub2 is a powered subwoofer built to extend the low end of PMC twotwo monitors. It uses an Advanced Transmission Line (ATL) bass-loaded cabinet with a 3 m effective line length, a rigid, heavily braced low-resonance enclosure, and DSP-based filtering and bass management. It can be used in a 2.1 configuration with twotwo monitors or to reproduce the LFE channel in surround systems, including confined broadcast and post-production rooms where midfield levels are needed.
The 250 mm (9.8 inch) long-throw driver is a flat piston made from a carbon-fibre and Nomex sandwich. It is driven by 600 W rms of built-in Class-D amplification, and a single parametric EQ is provided for in-room alignment.
Connections are two balanced analogue XLR inputs (left and right) and one AES digital XLR input that accepts sample rates from 32 to 192 kHz. Sources are selected from the rear panel or with the optional rc1 remote. The digital input is passed through to analogue and digital outputs, so the sub can also act as a digital-to-analogue converter.
Προδιαγραφές
- Μάρκα
- PMC
- Μοντέλο
- twotwo sub2
- Κατηγορία
- Στούντιο › Ηχεία studio
Audio
- Frequency response
- 25Hz - 500Hz
- Sensitivity
- 93dB SPL @ 1m (with Analogue i/p Sen @+12.5dB Vol @ 0dB, Input Level -10dBu)
- Effective ATL length
- 3m (9.8ft)
- Impedance
- 20k BAL
- Bass loading
- Advanced Transmission Line (ATL)
- EQ
- Single parametric EQ
- Digital sample rates
- 32 to 192kHz
Drivers
- Drive units
- LF 250mm (9.8 inch)
- Driver cone
- Carbon-fibre/Nomex sandwich flat piston
Inputs
- Analogue inputs
- 2 x balanced analogue Left/Right XLR Female
- Digital input
- 1 x AES digital XLR Female
Outputs
- Pass-through outputs
- Analogue and digital outputs
Power
- Amplifier power per channel
- 600Wrms
- Amplifier class
- Class-D
Physical
- Dimensions
- H 510mm (20″) x W 630mm (24.9″) x D 377mm (14.8″)
- Weight
- 40kg - 88.2lbs
Control
- Source selection
- Rear panel or optional rc1 remote
Warranty
- Extended warranty
- 20 years when registered within 10 days of purchase