3· Ενισχυτές
The QUAD 3 is a compact Class AB integrated amplifier with a built-in ESS DAC, MM phono stage and headphone amplifier. It suits listeners who want a single retro-styled unit for vinyl, digital sources, TV and Bluetooth.
- 65W per channel into 8 ohms, 100W into 4 ohms, Class AB
- ES9038Q2M DAC; USB up to 768kHz PCM and DSD512
- MM phono stage, 2 line inputs, HDMI ARC, optical and coax
- Bluetooth 5.1 with aptX and aptX HD
- Bass (+/-3dB) and Tilt controls, orange LCD strip
- Separate current-feedback headphone amplifier
Φωτογραφίες
8Αγγελίες
Δεν υπάρχουν ακόμα αγγελίες για αυτό το μοντέλο
Όταν κάποιος πουλήσει ένα 3, οι αγγελίες και το ιστορικό πωλήσεων θα εμφανίζονται εδώ.
Πούλησε ένα τέτοιοΠεριγραφή
The QUAD 3 combines a 65 W per channel (8 ohm) Class AB power amplifier with a preamp, a 32-bit ES9038Q2M DAC and a Class A post-DAC filter stage. The amplifier is fed by a 235VA toroidal transformer and a 30,000uF reservoir, and is rated at 100 W per channel into 4 ohms. Its styling draws on the QUAD 22 pre-amplifier, with an orange-lit LCD strip and a row of digital encoders for volume, source, balance, bass and Tilt.
On the digital side it offers USB-B (PCM up to 768kHz and DSD up to DSD512), coaxial and optical S/PDIF (up to 192kHz), HDMI ARC and Bluetooth 5.1 with aptX and aptX HD. S/PDIF and USB audio can be upsampled to 352.8kHz or 384kHz. Analogue sources connect through two line-level RCA inputs and a dedicated low-noise MM phono input.
The bass control adjusts the low end by +/-3dB. The Tilt control shifts bass and treble in opposite directions in 1dB steps around a 700Hz axis. A separate current-feedback headphone amplifier, a pre-out, a 12V trigger and a full-function remote are included, and firmware can be updated over USB.
Βίντεο
Προδιαγραφές
- Μάρκα
- Quad
- Μοντέλο
- 3
- Κατηγορία
- Hi-Fi και οικιακός ήχος › Ενισχυτές
Inputs
- Analogue (Aux) inputs
- 2 x line-level RCA
- Phono input
- 1 x Phono (MM)
- Digital inputs
- 1 x SPDIF (Coax), 1 x SPDIF (Optical), 1 x PC USB
- HDMI
- 1 x HDMI ARC
- Wireless input
- 1 x Bluetooth (aptX/aptX HD)
- Trigger input
- 1 x 12V Trigger
Outputs
- Pre amplifier output
- 1
- Speaker output
- 1 x Stereo Speaker
- Headphone output
- 1
- Trigger output
- 1 x 12V Trigger
Audio
- Power output
- 2 x 65W (8 ohm), 2 x 100W (4 ohm)
- Amplifier class
- Class AB
- DAC
- ES9038Q2M 32-bit
- Sampling frequency (Optical/Coaxial)
- 44.1kHz to 192kHz
- Sampling frequency (PC USB)
- 44.1kHz to 768kHz (PCM) / DSD64, DSD128, DSD256, DSD512
- Upsampling
- 352.8kHz or 384kHz (SPDIF and USB)
- Power amp gain
- +29dB
- Power amp frequency response
- 20Hz-20kHz (+/-0.3dB)
- Power amp signal-to-noise ratio
- > 110dB (A-weighted)
- Max. output current
- 10A
- Phono gain (MM)
- +47dB
- DAC signal-to-noise ratio
- > 116dB (A-weighted)
- Headphone load impedance
- 20-600 ohm
- Headphone output impedance
- 2.35 ohm
Connectivity
- Bluetooth
- 5.1 (aptX/aptX HD)
- Firmware update
- USB
Power
- Mains voltage
- 220-240V ~ 50/60Hz or 100-120V ~ 50/60Hz (depending on region)
- Transformer
- 235VA toroidal
- Reservoir capacitance
- 30,000uF
Physical
- Dimensions (W x H x D)
- 300 x 101 x 332 mm
- Net weight
- 8kg
- Gross weight
- 9.3kg
- Carton size (W x H x D)
- 366 x 215 x 420 mm
In the box
- Accessories
- Power Cord, Remote Control, User Manual, 2 x AAA batteries