Ania
The Ania is a moving-coil phono cartridge with a glass-filled PPS body, an elliptical diamond stylus and an aluminium cantilever. It is aimed at vinyl listeners who want a hand-wound MC design that fits Rega tonearms without separate overhang setting.
- Moving-coil cartridge with undamped, tie-wire-free generator
- Coil hand wound from 0.018 mm wire on an iron micro cross
- Elliptical diamond stylus on an aluminium cantilever
- Glass-filled PPS body with three-point Rega fixing
- Nominal output 350 μV; tracking force 1.75 - 2.00 g
- Lifetime limited warranty against manufacturing defects
Φωτογραφίες
8Αγγελίες
Δεν υπάρχουν ακόμα αγγελίες για αυτό το μοντέλο
Όταν κάποιος πουλήσει ένα Ania, οι αγγελίες και το ιστορικό πωλήσεων θα εμφανίζονται εδώ.
Πούλησε ένα τέτοιοΠεριγραφή
The Ania is a low-mass moving-coil cartridge built around a coil hand wound from 0.018 mm wire on an iron micro cross, driven by a high-power neodymium magnet. The generator is undamped, with no tie wire, and the cantilever sits on a rhomboid pivot. It carries an elliptical diamond stylus on an aluminium cantilever.
The body is moulded from PPS with 40% glass and fitted with stainless steel inserts. This replaces the machined aluminium body used on Rega's higher-priced MC models. It uses Rega's three-point fixing, so overhang is set automatically when it is fitted to a Rega tonearm. A rigid clear cover protects the fine internal wires during handling and fitting.
It is intended for an MC-capable phono stage. The recommended load is 100 Ω and 1000 pF, with the gain on high, which is the 'On' position on Rega phono stages. It is listed as an optional upgrade for the Planar 3 with its RB330 tonearm.
Βίντεο
Προδιαγραφές
- Μάρκα
- Rega
- Μοντέλο
- Ania
- Κατηγορία
- Εξοπλισμός DJ › Κεφαλές και βελόνες
Electrical
- Cartridge type
- Moving coil (MC)
- Nominal output voltage
- 350 μV
- Output impedance
- 10 Ω
- Input load impedance
- 100 Ω
- Channel balance
- ≥ 20 μV
- Separation
- ≥ -29 dB
Playback
- Tracking pressure
- 1.75 - 2.00 g
- Stylus profile
- Elliptical
- Cantilever
- Aluminium
- Coil wire
- 0.018 mm fine wire
- Magnet
- Neodymium
Phono stage settings
- Impedance
- 100 Ω
- Capacitance
- 1000 pF
- Gain setting
- High ('On' position for Rega phono stages)
Physical
- Body material
- PPS (Polyphenylene Sulphide) with 40% glass
- Inserts
- Stainless steel
- Mounting
- Rega three-point fixing
- Pivot
- Rhomboid
Warranty
- Warranty
- Lifetime limited warranty against manufacturing defects