SPL MTC Mk2
Analog stereo monitor and talkback controller for studios, with four stereo inputs, three speaker pairs plus a subwoofer output, two headphone amplifiers with Phonitor Matrix crossfeed and a separate cue mix for the artist. Aimed at music production and mixing/mastering rooms.
- 4 stereo inputs: 3 balanced TRS jack (A–C) and 1 RCA (D)
- 3 stereo speaker output pairs plus mono subwoofer output
- 2 headphone amps with Phonitor Matrix crossfeed
- Cue mix for artist, talkback with built-in condenser mic
- Internal +/-18 V rails, up to +22.5 dB level handling
Φωτογραφίες
6Αγγελίες
Δεν υπάρχουν ακόμα αγγελίες για αυτό το μοντέλο
Όταν κάποιος πουλήσει ένα SPL MTC Mk2, οι αγγελίες και το ιστορικό πωλήσεων θα εμφανίζονται εδώ.
Πούλησε ένα τέτοιοΠεριγραφή
The MTC Mk2 is an analog monitor controller that switches between four stereo sources and three pairs of stereo speakers, plus a mono subwoofer output. Each speaker pair has its own switch, so several can be active together. Monitoring modes cover stereo, mono, phase inversion and an LR swap, and combining mono with phase inversion isolates the mid or side signal. DIM lowers the level by 10 dB, and separate mute switches cover the speaker and headphone outputs.
Two Class AB headphone amplifiers both include the Phonitor Matrix, which applies analog crossfeed (adjustable) with a fixed 30° angle and a fixed -1 dB centre attenuation. Input C can double as a cue mix input that feeds the artist headphone output (HP 2) and the CUE OUT. The talkback section has a built-in condenser capsule, a level control, a TALK OUT, and a footswitch input for hands-free use.
Inputs A to C are balanced TRS jacks and D is RCA; active inputs are summed. A METER OUT follows the speaker output level for an external meter. The analog stages run on +/-18 V rails, and the unit has a built-in power supply for 85-264 V AC.
Προδιαγραφές
- Μάρκα
- SPL
- Μοντέλο
- MTC Mk2
- Κατηγορία
- Στούντιο › Άλλος εξοπλισμός στούντιο
Inputs
- Stereo inputs
- 4 (A, B, C on TRS jack; D on RCA)
- Maximum input level (TRS jack)
- 22.5 dBu
- Maximum input level (RCA)
- 22.5 dBu
- Input impedance (TRS jack)
- 20 kΩ
- Input impedance (RCA)
- 20 kΩ
- Footswitch input
- TS or TRS jack
Outputs
- Speaker outputs
- 3 stereo pairs
- Subwoofer output
- 1 mono
- Headphone outputs
- 2 (HP 1, HP 2 / Artist)
- Other outputs
- CUE OUT, TALK OUT, METER OUT
- Output impedance (XLR)
- 75 Ω
Audio
- Frequency range (-3 dB)
- 10 Hz – 150 kHz
- THD + N (10 Hz – 22 kHz, 0 dBu)
- 0.0027 %
- Noise (A-weighted)
- -94.3 dBu
- Dynamic range (TRS jack)
- 116.3 dB
- Dynamic range (RCA)
- 116.3 dB
- Common mode rejection (1 kHz)
- 80 dBu
- Dim attenuation
- 10 dB
Monitoring
- Phonitor Matrix angle
- Fixed 30°
- Phonitor Matrix centre attenuation
- Fixed -1 dB
Power
- Operating voltage for analog audio
- +/- 18 V
- Operating voltage for relays and LEDs
- + 12 V
- Mains voltage
- 85-264 V AC / 47-440 Hz
- Fuse
- 1 A
- Power consumption
- 15 W
Physical
- Dimensions (W x H x D)
- 272 x 91 x 275 mm (10.71 x 3.58 x 10.83 inch)
- Unit weight
- 3 kg (6.61 lbs)
- Shipping weight
- 4.2 kg (9.26 lbs)