MM Jubilee
Moving-magnet phono cartridge from Clearaudio's MM V2 series, built in a multilayer laminated-wood (Panzerholz) body with an aluminium cantilever and elliptical diamond. It suits turntable owners looking for a ~3.6 mV MM cartridge that works with common tonearms.
- Moving-magnet cartridge, MM V2 series
- Multilayer Panzerholz (laminated wood) body
- Aluminium cantilever, elliptical diamond stylus
- Output about 3.6 mV (1 kHz, 5 cm/s)
- Tracking force 2.2 g ± 0.3 g
- 2-year warranty with card returned in 14 days
Φωτογραφίες
8Αγγελίες
Δεν υπάρχουν ακόμα αγγελίες για αυτό το μοντέλο
Όταν κάποιος πουλήσει ένα MM Jubilee, οι αγγελίες και το ιστορικό πωλήσεων θα εμφανίζονται εδώ.
Πούλησε ένα τέτοιοΠεριγραφή
The Jubilee MM is a moving-magnet cartridge from the MM V2 series. Its body is made of laminated multilayer wood (Panzerholz), and the series is built around a low-resonance housing, reduced moving mass, an optimised HD stylus grind and damping of the pick-up system. The cantilever is aluminium and the stylus has an elliptical diamond cut.
Each cartridge in the range is measured several times across four stages, analysed and hand-selected, which is intended to keep the two stereo channels closely matched. The listed output is about 3.6 mV at 1 kHz and 5 cm/s, with a frequency response of 20 Hz to 20 kHz, 26 dB channel separation and 0.4 dB channel balance. Recommended tracking force is 2.2 g ± 0.3 g.
Electrically it is a standard MM design: 47 kΩ load resistance, 100 pF capacitive load, 0.66 kΩ coil impedance and 400 mH inductance. It is intended to work with common tonearms and needs a phono stage with an MM input. A 2-year manufacturer warranty applies when the warranty card is returned within 14 days of purchase.
Προδιαγραφές
- Μάρκα
- Clearaudio
- Μοντέλο
- MM Jubilee
- Κατηγορία
- Εξοπλισμός DJ › Κεφαλές και βελόνες
Audio
- Cartridge type
- Moving magnet (MM V2)
- Frequency response
- 20 Hz – 20 kHz
- Output voltage (1 kHz, 5 cm/s)
- ~ 3.6 mV
- Channel separation (1 kHz)
- 26 dB
- Channel balance (1 kHz)
- 0.4 dB
- Tracking ability
- 90 µm
Stylus
- Cantilever / diamond cut
- Aluminium / elliptical
- Stylus compliance
- 15 µ/mN
- Recommended tracking force
- 2.2 g ± 0.3 g
Electrical
- Coil impedance (1 kHz)
- 0.66 kΩ
- Coil inductance
- 400 mH
- Load resistance
- 47 kΩ
- Capacitive load
- 100 pF
Physical
- Total system weight
- 8.8 g (±0.4 g)
- Body material
- Panzerholz
Warranty
- Manufacturer warranty
- 2 years (warranty card returned within 14 days of purchase)
Documentation
- Manuals
- Moving Magnet V2 and Jubilee MM, English / German
- Safety notes
- English / German / French