MR3
Compact powered 2.0 studio monitor pair with 3.5-inch mid-low drivers and 1-inch silk dome tweeters, delivering 18W x 2 RMS. Aimed at home studios, video editing and everyday listening, with balanced TRS, RCA, AUX and Bluetooth 5.4 inputs.
- 52Hz–40kHz frequency response
- 18W x 2 (RMS), SPL up to 92.5dB at 1 m
- 3.5" mid-low drivers, 1" silk dome tweeters
- Balanced TRS, RCA and 3.5mm AUX inputs plus headphone out
- Bluetooth 5.4, connects two devices at once
- Room compensation knobs and ConneX app settings
Φωτογραφίες
8Αγγελίες
Δεν υπάρχουν ακόμα αγγελίες για αυτό το μοντέλο
Όταν κάποιος πουλήσει ένα MR3, οι αγγελίες και το ιστορικό πωλήσεων θα εμφανίζονται εδώ.
Πούλησε ένα τέτοιοΠεριγραφή
The MR3 is a pair of powered near-field monitors with a 52Hz to 40kHz frequency response. Each speaker uses a 3.5-inch mid-low driver and a 1-inch silk dome tweeter with a dimpled waveguide, in an MDF cabinet intended to limit distortion and resonance. Total output is 18W per side (RMS), with peak SPL of 92.5dB at 1 metre, enough for near-field work or a medium room.
The analog front end and the Texas Instruments Class-D amplifier are configured for 24bit/96kHz operation, and the speakers carry Hi-Res Audio certification. Room compensation is handled by rear High and Low knobs (±6dB at above 10kHz and around 125Hz) plus Low Cutoff, Acoustic Space and Desktop Control settings in the EDIFIER ConneX app.
Inputs include a balanced 1/4-inch TRS, unbalanced RCA and a 3.5mm AUX, along with a Bluetooth 5.4 receiver that can hold two devices at once. A headphone output is provided. The ConneX app also covers Bluetooth playback control, sound effect settings and the user manual.
Βίντεο
Προδιαγραφές
- Μάρκα
- Edifier
- Μοντέλο
- MR3
- Κατηγορία
- Στούντιο › Ηχεία studio
Audio
- Total output power (RMS)
- 18W + 18W
- Frequency response
- 52Hz - 40kHz
- Signal-to-noise ratio
- ≥ 85dB (A)
- Peak SPL
- 92.5dB (@ 1 meter)
- Resolution
- 24bit/96kHz
- Amplifier
- Class-D (Texas Instruments)
Drivers
- Drivers
- 3.5" mid-low drivers, 1" silk dome tweeters
- Cabinet
- MDF
Inputs
- Audio inputs
- Balanced ¼-inch TRS, Unbalanced RCA, ⅛-inch stereo (3.5mm AUX), Bluetooth
- Sensitivity (TRS)
- 1228 ± 100mV (+4dBu)
- Sensitivity (RCA)
- 775 ± 50mV
- Sensitivity (AUX)
- 775 ± 50mV
Outputs
- Headphone output
- Yes
Connectivity
- Bluetooth version
- V5.4
- Bluetooth codec
- SBC
- Simultaneous Bluetooth devices
- 2
- App
- EDIFIER ConneX
Room compensation
- High knob
- ± 6dB above 10kHz
- Low knob
- ± 6dB around 125Hz
- App settings
- Low Cutoff, Acoustic Space, Desktop Control
Physical
- Dimensions (active speaker, W x H x D)
- 125.5mm x 220mm x 185mm
- Dimensions (passive speaker, W x H x D)
- 125.5mm x 220mm x 176mm
- Net weight
- 3.85kg