MR5
Powered three-way studio monitor pair with a flat 46Hz–40kHz response and 110W RMS total output. It suits music production, video editing and everyday listening in near-field and mid-field setups.
- Tri-amped, 3-way active design with digital crossover and DRC
- 110W RMS total, max SPL 101dB at 1 m
- Frequency response 46Hz–40kHz
- XLR, TRS, RCA and 3.5mm AUX inputs plus headphone output
- Bluetooth 6.0 with LDAC and two-device multipoint
- Room compensation knobs and ConneX app EQ
Φωτογραφίες
8Αγγελίες
Δεν υπάρχουν ακόμα αγγελίες για αυτό το μοντέλο
Όταν κάποιος πουλήσει ένα MR5, οι αγγελίες και το ιστορικό πωλήσεων θα εμφανίζονται εδώ.
Πούλησε ένα τέτοιοΠεριγραφή
The MR5 is a pair of active studio monitors, each using a 5" woofer, a 3.75" mid-range driver and a 1" silk dome tweeter. Every driver has its own amplifier, with a digital 3-way active crossover and DRC handling the split. The tweeter has a dimpled waveguide to widen the listening area. Total output is 110W RMS, with a maximum SPL of 101dB at 1 metre.
Room compensation comes from rear High and Low knobs (±6dB above 10kHz and around 125Hz) plus Low Cut-Off, Acoustic Space and Desktop Control settings. Two preset sound modes and custom EQ are available in the EDIFIER ConneX app, which also handles playback control and the user manual.
Wired inputs are balanced XLR, balanced 1/4-inch TRS, unbalanced RCA and a 3.5mm AUX, with a 3.5mm headphone output. A Bluetooth 6.0 receiver supports LDAC and SBC and can connect to two devices at once. The system is Hi-Res Audio and Hi-Res Audio Wireless certified at 24-bit/96kHz.
Βίντεο
Προδιαγραφές
- Μάρκα
- Edifier
- Μοντέλο
- MR5
- Κατηγορία
- Στούντιο › Ηχεία studio
Audio
- Total output power (RMS)
- 10W + 10W (Treble), 15W + 15W (Mid), 30W + 30W (Bass)
- Frequency response
- 46Hz - 40kHz
- Signal-to-noise ratio
- ≥ 85dB (A)
- Max. sound pressure level
- 101dB (@1 meter)
- Crossover
- Bass/Mid 155 Hz, Mid/Treble 2600 Hz
- Hi-Res resolution
- 24-bit/96kHz
Drivers
- Woofer
- 5"
- Mid driver
- 3.75"
- Tweeter
- 1" silk dome
Inputs
- Audio inputs
- Balanced XLR, Balanced ¼-inch TRS, Unbalanced RCA, ⅛-inch stereo (3.5mm AUX), Bluetooth
- Input sensitivity (XLR)
- 1228 ± 50mV
- Input sensitivity (TRS)
- 1228 ± 50mV
- Input sensitivity (RCA)
- 700 ± 50mV
- Input sensitivity (AUX)
- 600 ± 50mV
Outputs
- Headphone output
- ⅛-inch stereo
Connectivity
- Bluetooth version
- V6.0
- Bluetooth codecs
- LDAC, SBC
- Multipoint
- Two devices at once
- App
- EDIFIER ConneX
Physical
- Dimensions, active speaker (W x H x D)
- 159mm × 264mm × 280mm
- Dimensions, passive speaker (W x H x D)
- 159mm × 264mm × 257mm
- Net weight
- 10.38kg