Pico POG
Compact polyphonic octave pedal that adds a sub-octave and an octave-up voice to the dry guitar signal, with separate level controls for each. A single Tone knob with three filter modes shapes the sound, for players who need an octave effect in very little pedalboard space.
- Digital polyphonic octave generator
- Separate Sub Octave, Octave Up and Dry volume knobs
- Tone knob with Tone (tilt EQ), Low Pass and High Pass modes
- LED colour shows the filter mode
- Buffered bypass, mono signal path
- Power adapter included
Φωτογραφίες
5Αγγελίες
Δεν υπάρχουν ακόμα αγγελίες για αυτό το μοντέλο
Όταν κάποιος πουλήσει ένα Pico POG, οι αγγελίες και το ιστορικό πωλήσεων θα εμφανίζονται εδώ.
Πούλησε ένα τέτοιοΠεριγραφή
The Pico POG is a digital polyphonic octave generator in a small enclosure. It tracks notes and chords and blends a lower octave, an upper octave and the dry signal. Each of the three voices has its own volume knob, so the knobs work as a three-channel mixer.
The Tone knob works differently depending on the Filter button. In Tone mode it acts as a tilt EQ across all three voices, with a flat response at centre. In Low Pass mode it sets the cutoff of a resonant low-pass filter on the sub and octave-up voices only. In High Pass mode it sets the cutoff of a high-pass filter on those same two voices. The LED colour shows the active mode: green for Tone, red for Low Pass and orange for High Pass.
The pedal is mono, with one input jack and one output jack, and uses buffered bypass. A footswitch engages the effect. A 9.6VDC power adapter is supplied, and the pedal draws 100mA.
Βίντεο
Προδιαγραφές
- Μάρκα
- Electro-Harmonix
- Μοντέλο
- Pico POG
- Κατηγορία
- Εφέ και πετάλια
Audio
- Circuit
- Digital
- Bypass
- Buffered Bypass
- Audio
- Mono
- Voices
- Sub Octave, Octave Up, Dry
Controls
- Volume knobs
- 3 (Sub Octave, Octave Up, Dry)
- Tone knob
- 1, with 3 filter modes
- Filter button
- Switches between Tone, Low Pass and High Pass modes
- Footswitch
- Engages or bypasses the effect
- Status LED
- Green (Tone), Red (Low Pass), Orange (High Pass); off in bypass
Connectivity
- Input
- 1 x input jack
- Output
- 1 x output jack
- Power jack
- 9V power jack
Power
- Power supply
- 9.6VDC-200mA power adapter included
- Current draw
- 100mA
Physical
- Dimensions (in)
- 3.65 x 2.0 x 2.0
In the box
- Power adapter
- Included