FA501iC
The FA501iC is a 6-inch two-way in-ceiling/in-wall loudspeaker from Fyne Audio's FA500iC series. It suits custom-install and home-theatre setups that need a shallow, paintable speaker with an IsoFlare point-source driver.
- 6" (150mm) IsoFlare point-source driver
- 25mm titanium dome compression tweeter
- Passive 2nd order low pass, 1st order high pass crossover
- 99mm depth behind mounting surface
- Round and square paintable grilles
- 8 Ohm, 89dB sensitivity, 30 - 125 W RMS amplifier
Φωτογραφίες
6Αγγελίες
Δεν υπάρχουν ακόμα αγγελίες για αυτό το μοντέλο
Όταν κάποιος πουλήσει ένα FA501iC, οι αγγελίες και το ιστορικό πωλήσεων θα εμφανίζονται εδώ.
Πούλησε ένα τέτοιοΠεριγραφή
The FA501iC is a two-way flush-mount loudspeaker for ceilings and walls. It uses a 150mm (6") IsoFlare point-source driver, with a 25mm titanium dome compression tweeter at the centre of a multi-fibre bass/midrange cone and a FyneFlute surround. The crossover is tuned for an infinite-baffle, flush-mount position.
The cabinet is shallow, needing 99mm behind the mounting surface, and fixes in place with clamps that accept surfaces 5 - 50mm thick. A round grille and a square low-profile grille are both supplied, and both can be painted so the speaker blends into the room. A cut-out template and a manual are available as downloads.
The speaker is passive and connects to a separate amplifier. It has an 8 Ohm nominal impedance and 89dB sensitivity, and the recommended amplifier power is 30 - 125 W RMS. The crossover is a passive design with a 1.7kHz crossover frequency.
Προδιαγραφές
- Μάρκα
- Fyne Audio
- Μοντέλο
- FA501iC
- Κατηγορία
- Hi-Fi και οικιακός ήχος › Ηχεία
Audio
- System type
- 2 way IsoFlare loudspeaker for in ceiling or in wall application
- Drive unit complement
- 1 x 150mm (6") IsoFlare point source driver, multi-fibre bass / midrange cone, FyneFlute surround with 25mm titanium dome compression tweeter
- Frequency response (-6dB typical in room)
- 40Hz - 34kHz
- Sensitivity (2.83 Volt @ 1m)
- 89dB
- Nominal impedance
- 8 Ohm
- Crossover frequency
- 1.7kHz
- Crossover type
- Passive 2nd order low pass, 1st order high pass
- Suggested min volume
- 12 L
Power
- Recommended amplifier power (Watt RMS)
- 30 - 125
- Peak power handling (Watt)
- 250
- Continuous power handling (Watt RMS)
- 62.5
Physical
- Dimensions - Dia x Depth
- 224 x 101mm (8.8 x 4.0")
- Square grille dimensions
- 233 x 233mm (9.2 x 9.2")
- Round grille diameter
- 232mm (9.1")
- Net weight - each
- 2.3kg (5.0lbs)
Installation
- Cut-out diameter
- 208mm (8.2")
- Depth behind mounting surface
- 99mm (4.0")
- Clamp travel
- 5 - 50mm (0.2 - 2.0")
- Grille options
- Round Grille, Square Grille
In the box
- Supplied
- Installation clamps, round and square paintable grilles
- Sold as
- Single unit