Martian 2
Large-diaphragm electrostatic cardioid condenser microphone with Class A discrete electronics and a metal body. Aimed at voice and instrument recording, as a main or support mic, and supplied with a shockmount, pop filter and quickstart guide.
- 35 mm large-diaphragm electrostatic capsule
- Cardioid, pressure-gradient design
- Class A discrete electronics
- Swiveling head and metal body
- Needs 48 V phantom power, 3-pin XLR output
- Shockmount and metal pop filter included
Φωτογραφίες
5Αγγελίες
Δεν υπάρχουν ακόμα αγγελίες για αυτό το μοντέλο
Όταν κάποιος πουλήσει ένα Martian 2, οι αγγελίες και το ιστορικό πωλήσεων θα εμφανίζονται εδώ.
Πούλησε ένα τέτοιοΠεριγραφή
The Martian is a 35 mm large-diaphragm condenser with a pressure-gradient transducer and a cardioid pickup pattern, which helps isolate the sound source and reject feedback. The capsule is hand-built and shock-mounted internally. The circuit uses Class A discrete electronics, aimed at low self-noise and durability, and the voicing is described as warm and classic, suited to enriching low frequencies and refining strong transients.
The microphone has a metal body and a swiveling head that can be angled toward the sound source. A custom cradle adds further shock isolation and holds the supplied metal pop filter, which reduces plosives and unwanted vibration. Frequency response runs from 20 Hz to 20 kHz, with a maximum SPL of 134 dB at 0.5% THD and a dynamic range of 123.5 dB.
It connects through a 3-pin XLR male output and needs external 48 V phantom power, drawing under 3 mA. Manuals are offered in English, French, German, Italian, Japanese and Spanish.
Βίντεο
Προδιαγραφές
- Μάρκα
- iCON
- Μοντέλο
- Martian 2
- Κατηγορία
- Στούντιο › Μικρόφωνα
Audio
- Transducer type
- Electrostatic
- Operating principle
- Pressure gradient
- Diaphragm active diameter
- 35 mm
- Polar pattern
- Cardioid
- Frequency range
- 20 Hz to 20 kHz
- Sensitivity at 1 kHz into 1000 Ω load
- 33 mV/Pa
- Maximum SPL for 0.5% THD at 1000 Ω load
- 134 dB
- S/N ratio
- 83.2 dB-A
- Equivalent noise level (DIN/IEC A-weighted)
- 10.5 dB-A
- Dynamic range
- 123.5 dB
Outputs
- Output connector
- 3-pin XLR male
- Output impedance
- 50 Ω
- Rated load impedance
- 1000 Ω
- Suggested load impedance
- > 250 Ω
Power
- Phantom power voltage (pins 2 & 3 of XLR)
- +48V (+/-4V)
- Current consumption
- < 3mA
Physical
- Weight
- 0.77kg (1.7lb)
- Dimensions (mm)
- 118mm x 78mm x 149mm
- Dimensions (inches)
- 4.65" (L) x 3.07" (W) x 5.87" (H)
In the box
- Microphone
- Martian microphone
- Pop filter
- Included
- Shockmount
- Included
- Documentation
- Quickstart Guide