Ci130.2CR
KEF Καταργήθηκε

Ci130.2CR

The Ci130.2CR is a 5.25-inch round in-ceiling speaker from KEF's Ci-C architectural series, built around a Uni-Q coaxial driver array. It suits custom-install projects, including damp or UV-exposed rooms, and fits where installation depth is limited.

  • 5.25 in. (130 mm) Uni-Q coaxial driver array
  • 16 mm aluminium dome tweeter with waveguide
  • IP64 certified, weather resistant
  • 77.7 mm mounting depth from surface
  • Magnetic, paintable grille and bezel
  • 8 ohm, 87 dB sensitivity, 10-80 W amplifier
Πούλησε ένα τέτοιο

Φωτογραφίες

8

Αγγελίες

Δεν υπάρχουν ακόμα αγγελίες για αυτό το μοντέλο

Όταν κάποιος πουλήσει ένα Ci130.2CR, οι αγγελίες και το ιστορικό πωλήσεων θα εμφανίζονται εδώ.

Πούλησε ένα τέτοιο

Περιγραφή

The Ci130.2CR is an in-ceiling speaker in KEF's Ci-C Series, the entry point to the maker's custom-installation range. It uses a Uni-Q driver array in which a 16 mm aluminium dome tweeter with a waveguide sits at the acoustic centre of the 130 mm bass/midrange cone. The two drivers act as a single point source, so sound spreads widely and evenly through the room.

The cabinet is very shallow, with a mounting depth of 77.7 mm from the surface, so it can go into ceilings where deeper speakers will not fit. The speaker has a weather-resistant treatment against moisture and UV light and an IP64 rating. Ultra-Thin Bezels and a flat magnetic grille keep it visually discreet, and both the grille and the bezel can be painted to match the ceiling.

It is a passive 8-ohm speaker for use with a separate amplifier rated at 10-80 W. Software for the Ci range is offered through the maker's Ci software download page.

Προδιαγραφές

Μάρκα
KEF
Μοντέλο
Ci130.2CR
Κατηγορία
Live ήχος › Άλλος εξοπλισμός live

Audio

Frequency response
52Hz-20kHz (+/-6dB) open-backed
Sensitivity
87dB (2.83V/ 1m)
Nominal impedance
8 Ohms
Recommended amplifier power
10-80W

Drivers

LF driver
130mm (5.25in.) Uni-Q
HF driver
16mm (0.6in.)
Tweeter
16mm (0.6in.) Aluminium dome tweeter with tangerine waveguide

Features

Bezel
UTB™ Ultra-Thin Bezel
Grille
Magnetic grille
Finish
Paintable grille and bezel
Weather resistance
Weather Resistant
Ingress protection
IP64 certified

Physical

Cut-out dimensions (H x W)
158 mm x 158 mm (6.22 in. x 6.22 in.)
Mounting depth from surface
77.7mm (3.06in.)
External dimensions (H x W x D)
193.4 mm x 193.4 mm x 82.3 mm (7.61 in. x 7.61 in. x 3.24 in.)
Net weight
1.3kg (2.8lbs)

Δεδομένα: kef.com; φωτογραφίες: KEF product page · ενημερώθηκε 2026-10-12 · Βρήκες λάθος; Γράψε μας