Ci200TRB
In-ceiling subwoofer from KEF's architectural range, built around a 200 mm (8 in.) ultra-thin T Series woofer. It suits installations with very little mounting depth, such as narrow ceiling or wall cavities in apartments and home theatres.
- 200 mm (8 in.) ultra-thin T Series subwoofer driver
- Mounting depth from surface of 59 mm (2.32 in.)
- Passive response 42 Hz-120 Hz; 32 Hz-120 Hz with KASA500
- Pairs with Ci160TR and Ci160TS speakers in passive mode
- Stereo mode 2 x 8 Ohm; mono mode 16 Ohm
- Cut-out 240 x 240 mm; weight 1.7 kg
Φωτογραφίες
8Αγγελίες
Δεν υπάρχουν ακόμα αγγελίες για αυτό το μοντέλο
Όταν κάποιος πουλήσει ένα Ci200TRB, οι αγγελίες και το ιστορικό πωλήσεων θα εμφανίζονται εδώ.
Πούλησε ένα τέτοιοΠεριγραφή
The Ci200TRB is a shallow-mount 200 mm (8 in.) subwoofer that uses a subwoofer version of KEF's ultra-thin T Series woofer driver. It needs under 59 mm of mounting depth, so it fits in tight ceiling or wall spaces where a conventional bass unit would not.
It can run in two ways. In passive mode it extends the low end of KEF's Ci160TR round or Ci160TS square speakers, with a recommended amplifier power of 10-125 W and a frequency response of 42 Hz-120 Hz. In active mode it is driven by the KEF KASA500 System Amplifier, which lowers the response to 32 Hz-120 Hz and gives the output expected of a subwoofer in a home theatre.
The nominal impedance is 2 x 8 Ohm in stereo mode or 16 Ohm in mono mode, and sensitivity is 87 dB (2.83 V / 1 m). The grille-fronted unit measures 290 x 290 mm with a 240 x 240 mm cut-out and weighs 1.7 kg.
Βίντεο
Προδιαγραφές
- Μάρκα
- KEF
- Μοντέλο
- Ci200TRB
- Κατηγορία
- Hi-Fi και οικιακός ήχος › Ηχεία
Audio
- Frequency response (passive)
- 42Hz-120Hz
- Frequency response (with KASA500)
- 32Hz-120Hz
- Sensitivity
- 87dB (2.83V/ 1m)
- Drive units
- LF: 200mm (8 in.)
Power
- Nominal impedance (stereo mode)
- 2 x 8 Ohm
- Nominal impedance (mono mode)
- 16 Ohm
- Recommended amplifier power (passive)
- 10-125W
- Recommended amplifier power (active)
- KASA500
Installation
- Cut-out dimensions (H x W)
- 240 mm x 240 mm (9.45 in. x 9.45 in.)
- Mounting depth from surface
- 59mm (2.32 in.)
Physical
- Product external dimensions (H x W x D)
- 290 mm x 290 mm x 63 mm (11.42 in. x 11.42 in. x 2.48 in.)
- Net weight
- 1.7kg (3.75 lbs)