C 368
The C 368 is an 80 W per channel stereo integrated amplifier with a built-in DAC, MM phono stage and aptX Bluetooth. It suits hi-fi systems that mix digital and analogue sources and may later be expanded with optional MDC modules.
- 80 W x 2 into 8 or 4 ohms, bridgeable for 300 W
- Built-in DAC, up to 24 bit/192 kHz
- MM phono input
- Bluetooth A2DP with aptX
- MDC slots for BluOS, HDMI, USB/DSD modules
- 12V trigger, IR and RS-232 for custom install
Φωτογραφίες
7Αγγελίες
Δεν υπάρχουν ακόμα αγγελίες για αυτό το μοντέλο
Όταν κάποιος πουλήσει ένα C 368, οι αγγελίες και το ιστορικό πωλήσεων θα εμφανίζονται εδώ.
Πούλησε ένα τέτοιοΠεριγραφή
The C 368 is an integrated amplifier from NAD's Classic Series using HybridDigital amplification. It delivers 80 W per channel into 8 or 4 ohms and can be switched to bridge mode. Combined with the NAD C 268 power amplifier, it forms a 2 x 300 W configuration for more demanding speakers.
A DAC stage handles optical and coaxial digital inputs at up to 24 bit/192 kHz. Analogue sources connect through line inputs or the MM phono input. A dedicated headphone amplifier is included, along with tone controls, preamp and subwoofer outputs, and Speaker A/B terminals.
The amplifier has MDC expansion slots for optional modules such as BluOS streaming, HDMI switching or USB/DSD playback. Bluetooth with aptX is built in. For custom installs it provides 12V triggers, IR in/out and an RS-232 port, and it is listed as certified for Control4, Crestron, RTI, URC, AMX, Savant and Elan. A remote and a smartphone control app are listed.
Βίντεο
Προδιαγραφές
- Μάρκα
- NAD
- Μοντέλο
- C 368
- Κατηγορία
- Hi-Fi και οικιακός ήχος › Ενισχυτές
Amplifier
- Continuous power, stereo (4 and 8 ohms)
- >80W (ref. 20-20kHz at rated THD, both channels driven)
- Continuous power, bridge mode (8 ohms)
- 300W (at 20-20kHz at THD 0.03%)
- THD (20Hz-20kHz)
- <0.03% (250mW to 80W, 8 Ohms and 4 Ohms)
- Signal to noise ratio
- >98dB (A-weighted, 500mV input, ref. 1W out in 8 Ohms)
- Clipping power
- >95W (at 1kHz 0.1% THD)
- IHF dynamic power
- 8 Ohms 120W; 4 Ohms 200W; 2 Ohms 250W
- Peak output current
- >20A (in 1 Ohm, 1ms)
- Damping factor
- >300 (ref. 8 Ohms, 20Hz and 6.5kHz)
- Frequency response
- ±0.3dB (20Hz-20kHz)
- Channel separation
- >75dB (1kHz); >70dB (10kHz)
Inputs
- Analogue inputs
- Line inputs
- Phono input
- MM
- Digital inputs
- SPDIF coax and optical
- Input sensitivity (for 80W in 8 ohms)
- Line In: 470mV; Digital In: 21% FS
- Line input impedance
- 22 kilohm + 100pF
- Phono input sensitivity
- 1.44mV (ref. 500mV out, Volume maximum)
Outputs
- Speaker outputs
- Speaker A, Speaker B
- Other outputs
- Preamp/Subwoofer out; headphone amplifier
- Headphone output impedance
- 6 Ohms
Connectivity
- Bluetooth
- A2DP with aptX supported
- Bluetooth frequency band
- 2.402G-2.480G
- Control connections
- 12V Trigger in/out; IR in/out; RS-232 serial port
- Expansion
- MDC slots for future upgrades
Audio
- Sample rate
- up to 24 bit/192kHz
- Tone controls
- Treble: ±7.0dB at 20kHz; Bass: ±7.0dB at 60Hz; Balance: -10dB
Power
- Power consumption (Auto Standby ON, Network Standby OFF)
- 0.5 Watts
- Power consumption (Auto Standby ON, Network Standby ON)
- 1.2 Watts
- Power consumption (OFF mode)
- 0.1 Watts
Physical
- Dimensions (W x H x D)
- 435 x 100 x 390mm (17 1/8 x 3 15/16 x 15 3/8)"
- Net weight
- 7.8kg (17.2lb)
- Shipping weight
- 10.1kg (22.3lb)
Control and software
- Control
- IR remote; smartphone control app
- Control system certification
- Control4, Crestron, RTI, URC, AMX, Savant, Elan