M28
Seven-channel power amplifier for multi-channel home theatre and music systems. It uses Purifi Eigentakt amplification within NAD's HybridDigital design and is aimed at users building a high-performance surround setup.
- Seven channels of Purifi Eigentakt amplification
- NAD HybridDigital design
- 200 W per channel into 8 ohms, all channels driven
- Balanced XLR and single-ended RCA inputs
- Compact, energy-efficient, low heat output
- Control4, Crestron, Lutron, NICE, RTI, URC drivers
Φωτογραφίες
6Αγγελίες
Δεν υπάρχουν ακόμα αγγελίες για αυτό το μοντέλο
Όταν κάποιος πουλήσει ένα M28, οι αγγελίες και το ιστορικό πωλήσεων θα εμφανίζονται εδώ.
Πούλησε ένα τέτοιοΠεριγραφή
The M28 is a seven-channel power amplifier that combines Purifi Eigentakt amplification with NAD's HybridDigital architecture. Every channel is rated at 200 W into 8 ohms with all channels driven, and the amplifier has substantial dynamic headroom for sudden level changes in film and music. Noise and distortion are specified at very low levels, and the frequency response stays flat across varying speaker loads.
For connection to a processor it offers fully balanced XLR inputs as well as single-ended RCA inputs. Speakers attach through high-quality binding posts. The design is compact and energy-efficient with low heat output, so it can be placed in a dedicated rack or a custom installation.
Control integration downloads are listed for Control4, Crestron, Lutron, NICE, RTI and URC, along with RS232 documentation. Manuals are available in English, French, German and Spanish, plus a data sheet and quick start guide. The unit moves to standby automatically after up to 30 minutes without an input signal.
Βίντεο
Προδιαγραφές
- Μάρκα
- NAD
- Μοντέλο
- M28
- Κατηγορία
- Hi-Fi και οικιακός ήχος › Ενισχυτές
Audio
- Channels
- 7
- Rated power, all channels (8 Ohms)
- ≥ 200 W (ref. rated THD, 20 Hz - 20 kHz, all channels driven)
- Rated power, all channels (4 Ohms)
- ≥ 340 W (ref. rated THD, 20 Hz - 20 kHz, all channels driven)
- FTC power, two channels (8 Ohms)
- ≥ 220 W (ref. rated THD, 20 Hz - 20 kHz, two channels driven)
- FTC power, two channels (4 Ohms)
- ≥ 400 W (ref. rated THD, 20 Hz - 20 kHz, two channels driven)
- Rated THD (250 mW to rated power, CCIF IMD, DIM 100)
- ≤0.003 % (ref. 20 Hz - 20 kHz)
- IHF dynamic power (8 Ohms)
- 280 W (all channels driven)
- IHF dynamic power (4 Ohms)
- 560 W (one channel driven)
- Damping factor
- >750 dB (ref. 8 Ohms, 50 Hz and 1 kHz)
- Frequency response
- ± 0.1 dB (ref. 20 Hz - 20 kHz); - 3 dB at 3 Hz to 60 kHz
- Signal/noise ratio, balanced (ref. 1 W)
- > 102 dB (A-weighted)
- Signal/noise ratio, single-ended (ref. 1 W)
- > 97 dB (A-weighted)
- Signal/noise ratio, balanced (ref. rated power)
- > 124 dB (A-weighted)
- Signal/noise ratio, single-ended (ref. rated power)
- > 120 dB (A-weighted)
Inputs
- Input types
- Balanced XLR, single-ended RCA
- Input impedance, balanced
- 47 kΩ
- Input impedance, single-ended
- 23 kΩ
Outputs
- Speaker connections
- Binding posts
Power
- Standby power
- ≤ 0.5 W
- Time to standby with no input signal
- ≤ 30 minutes
Physical
- Dimensions (W x H x D)
- 435 x 156 x 380 mm (17 3/16 x 6 3/16 x 15 in)
- Shipping weight
- 21.2 kg (46.7 lbs)