KU 100
Binaural dummy head stereo microphone with two omnidirectional condenser capsules in artificial ears. It is aimed at immersive headphone-oriented recording of music, drama and noise documentation, and its recordings also work on loudspeakers.
- Binaural dummy head with two omnidirectional condenser capsules
- Diffuse-field equalised; loudspeaker compatible
- Max SPL 135 dB, 145 dB with -10 dB pad
- Three-position low cut: 150 Hz, 40 Hz, linear
- Balanced XLR 5 and unbalanced BNC outputs
- P48, 6 x AA battery or supplied 9 V PSU
Φωτογραφίες
8Αγγελίες
Δεν υπάρχουν ακόμα αγγελίες για αυτό το μοντέλο
Όταν κάποιος πουλήσει ένα KU 100, οι αγγελίες και το ιστορικό πωλήσεων θα εμφανίζονται εδώ.
Πούλησε ένα τέτοιοΠεριγραφή
The KU 100 is a head-shaped binaural microphone with a pressure-transducer capsule fitted in each artificial ear. Placed at the listening position, it captures a two-channel image intended for headphone playback, with lateral and vertical localisation and room decay surrounding the listener. The response is diffuse-field equalised, so recordings also translate to loudspeakers as a conventional-sounding stereo image.
The circuitry is transformerless. Maximum SPL for 0.5% THD is 135 dB, or 145 dB with the -10 dB preattenuation switch. A second switch selects a 150 Hz low cut, a 40 Hz low cut or a linear response. Both switches act on both channels. Typical uses include classical recording, radio drama, experimental pop and ambient work, plus noise analysis in cars and workplaces.
Output is a balanced 5-pin XLR stereo connector and unbalanced BNC outputs. It runs on P48 phantom power, six AA batteries or the supplied external 9 V power supply. A 5/8"-27 thread on the top and bottom fits standard stands, with adapters for 1/2" and 3/8" studs.
Βίντεο
Προδιαγραφές
- Μάρκα
- Neumann
- Μοντέλο
- KU 100
- Κατηγορία
- Στούντιο › Μικρόφωνα
Audio
- Acoustical operating principle
- Pressure transducer
- Directional pattern
- Ear
- Frequency range
- 20 Hz ... 20 kHz
- Sensitivity at 1 kHz into 1 kohm
- 20 mV/Pa
- Maximum SPL for THD 0.5%
- 135 dB
- Maximum SPL for THD 0.5% with preattenuation
- 145 dB
- Equivalent noise level, A-weighted
- 16 dB-A
- Equivalent noise level, CCIR
- 29 dB (23 dB lt. BA)
- Signal-to-noise ratio, A-weighted (re. 94 dB SPL)
- 78 dB
- Signal-to-noise ratio, CCIR (re. 94 dB SPL)
- 65 dB
- Switches
- -10 dB pad; low cut 150 Hz / 40 Hz / linear
Outputs
- Rated impedance
- 50 ohms balanced, 200 ohms unbalanced
- Rated load impedance
- 1 kohms
- Maximum output voltage
- 8 dBu
- Output connectors
- Balanced XLR 5 stereo, unbalanced BNC
- Matching connector
- XLR 3 F / XLR 5 F
Power
- Supply voltage (P48, IEC 61938)
- 48 V ± 4 V / 6 x 1.5 V
- Current consumption (P48, IEC 61938)
- 2 x 3.5 mA
- Battery supply
- 6 x 1.5 V (AA) round cell
- External power supply unit (supplied)
- 9 V
Physical
- Weight without batteries
- approx. 3500 g
- Weight with carrying case
- approx. 9500 g
- Height
- 280 mm / 360 mm (case)
- Width
- 180 mm / 390 mm (case)
- Depth
- 220 mm / 260 mm (case)
- Stand mount
- 5/8"-27 female thread, top and bottom; adapters for 1/2" and 3/8"
- Colour
- Black
In the box
- Contents
- KU 100 Dummy Head, IC 5 Microphone Cable, AC 20 Adapter Cable, Plugin Mains Unit, Aluminium Case