TLE1
The TLE1 is a compact, tall and slim active loudspeaker with a built-in 150W amplifier and a transmission-line bass design. It suits listeners who need low-frequency extension in a small footprint and care about the look of their audio system.
- Two doped 170mm cast alloy bass drivers
- Built-in 150W RMS Bryston-designed amplifier
- Transmission line, effective length 3m / 9.8ft
- Frequency response 22Hz-200Hz
- 2 x XLR and 2 x RCA phono inputs
- Variable roll-off 40Hz-155Hz at 12dB/Oct
Φωτογραφίες
5Αγγελίες
Δεν υπάρχουν ακόμα αγγελίες για αυτό το μοντέλο
Όταν κάποιος πουλήσει ένα TLE1, οι αγγελίες και το ιστορικό πωλήσεων θα εμφανίζονται εδώ.
Πούλησε ένα τέτοιοΠεριγραφή
The TLE1 combines a loudspeaker and a power amplifier in one slender cabinet with a small footprint. It uses two doped 170mm cast alloy chassis bass drivers, driven by a 150W RMS amplifier section based on a Bryston design. Inside the cabinet is a transmission line with an effective length of 3m (9.8ft), which gives a stated frequency response of 22Hz to 200Hz.
The amplifier section has a power bandwidth of 1Hz to 100kHz and a signal to noise ratio of 90dB referenced to 0dBu. The roll-off frequency is variable between 40Hz and 155Hz at 12dB per octave. Power consumption is 160W.
Inputs are two XLR and two RCA phono connectors, each with a 20k Ohm input impedance. The unit measures 550mm high, 200mm wide and 545mm deep plus grille, and weighs 17.5kg. A 20 year warranty applies if the product is registered within 10 days of purchase. The model is listed among PMC's archive products. Brochure and user manual downloads are provided.
Προδιαγραφές
- Μάρκα
- PMC
- Μοντέλο
- TLE1
- Κατηγορία
- Στούντιο › Ηχεία studio
Audio
- Frequency response
- 22Hz-200Hz
- Effective ATL length
- 3m 9.8ft
- Drive units (LF)
- 2 x Doped 170mm cast Alloy Chassis
- Roll-off frequency
- Variable 40Hz-155Hz @ 12dB/Oct
Amplifier
- Amplifier section
- Bryston designed, 150W RMS
- Power bandwidth
- 1Hz - 100kHz
- Signal to noise
- 90dB ref. 0dBu
Inputs
- XLR inputs
- 2 x XLR, input impedance 20k Ohms
- RCA inputs
- 2 x RCA Phono, impedance 20k Ohms
Power
- Power consumption
- 160W
Physical
- Height
- 550mm 21.6"
- Width
- 200mm 7.80"
- Depth
- 545mm 21.5" + Grille
- Weight
- 17.5kg 38.5lbs
Warranty
- Extended warranty
- 20 years when registered within 10 days of purchase
Downloads
- Documents
- Brochure, User Manual