Pick it MM E
Pro-Ject Καταργήθηκε

Pick it MM E

Entry-level moving-magnet phono cartridge with a conical diamond stylus and a lightweight ABS body. It suits vinyl listeners who want an affordable, general-purpose cartridge for a turntable with a half-inch mounting.

  • Moving-magnet (MM) cartridge
  • Conical diamond stylus
  • Low-mass system with neodymium magnet
  • Damped ABS body, 5.5 g
  • Output 3.8 mV at 1 kHz
  • Tracking force 2.0 g recommended
Πούλησε ένα τέτοιο

Φωτογραφίες

8

Αγγελίες

Δεν υπάρχουν ακόμα αγγελίες για αυτό το μοντέλο

Όταν κάποιος πουλήσει ένα Pick it MM E, οι αγγελίες και το ιστορικό πωλήσεων θα εμφανίζονται εδώ.

Πούλησε ένα τέτοιο

Περιγραφή

The Pick it MM E is a moving-magnet cartridge that converts record grooves into an electrical signal. It uses a low-mass generator system built around a miniature neodymium magnet, which lowers inertia and improves tracking. The stylus is a conical diamond, and the stylus is shielded by a protective design.

The body is made from resonance-optimised ABS and the cartridge weighs about 5.5 g. The highly damped housing is intended to reduce vibration-induced coloration and keep background noise low, making it a general-purpose option for a wide range of records.

It mounts to a tonearm headshell using the 1/2 inch standard. Output voltage is 3.8 mV at 1 kHz, the recommended tracking force is 2.0 g within a 1.8 to 2.2 g range, and the recommended load resistance is 47 kΩ. Frequency response is 10 to 20,000 Hz within ±2 dB.

Βίντεο

Προδιαγραφές

Μάρκα
Pro-Ject
Μοντέλο
Pick it MM E
Κατηγορία
Εξοπλισμός DJ › Κεφαλές και βελόνες

Audio

Cartridge principle
MM (Moving-Magnet)
Output voltage at 1 kHz
3,8 mV (3,54 cm/sec)
Frequency response
10 - 20 000 Hz +/- 2dB
Tracking ability at 315Hz
70 μm
Dynamic compliance
14 μm/mN

Stylus

Stylus type
Conical
Tracking force, range
1,8 - 2,2 g (mN)
Tracking force, recommended
2,0 g (mN)
Tracking angle
23°

Connectivity

Mounting standard
1/2 inch
Recommended load resistance
47 kΩ

Physical

Height stylus tip to top mounting surface
18,2 mm
Cartridge weight
5,5 g
Body material
Resonance optimized ABS
Generator magnet
Miniature neodymium

Δεδομένα: project-audio.com; φωτογραφίες: Pro-Ject product page · ενημερώθηκε 2026-10-11 · Βρήκες λάθος; Γράψε μας