QI LCR65RP
A 2 x 6.5-inch in-wall left/centre/right speaker with a 1-inch swivelling tweeter and a low-profile magnetic grille. It suits home cinema installs where a slim, flush fit is wanted and mounting depth is limited.
- 2 x 6.5" in-wall LCR speaker
- 1" swivel tweeter with switchable HF level
- Power handling 15 - 100W, 8 ohm nominal
- Sensitivity 87 dB (2.83V, 1m)
- Max rear depth 85 mm
- Magnetic low-profile grille
Φωτογραφίες
8Αγγελίες
Δεν υπάρχουν ακόμα αγγελίες για αυτό το μοντέλο
Όταν κάποιος πουλήσει ένα QI LCR65RP, οι αγγελίες και το ιστορικό πωλήσεων θα εμφανίζονται εδώ.
Πούλησε ένα τέτοιοΠεριγραφή
The Q Install LCR 65RP is an in-wall speaker built for left, centre or right channel duty in home theatre systems. It uses two 6.5-inch low-frequency drivers with mass-damped polypropylene cones and high-powered coil and magnet assemblies, paired with a 1-inch silk dome tweeter protected by a mesh.
The tweeter swivels so the high-frequency direction can be adjusted, and a switchable high-frequency level setting allows further tuning to the room. High-order crossovers are used for a smooth transition between drivers, with the mid-range tuned to keep speech clear. The unit needs only a shallow mounting depth of 85 mm, and the low-profile grille attaches magnetically.
It is a passive speaker with a nominal 8 ohm impedance and 15-100 W program power handling, so it needs an A/V receiver or power amplifier. It belongs to the Q Install in-wall range, which also includes 8-inch and 6.5-inch two-way units and a passive 8-inch subwoofer for extra bass.
Προδιαγραφές
- Μάρκα
- Q Acoustics
- Μοντέλο
- QI LCR65RP
- Κατηγορία
- Hi-Fi και οικιακός ήχος › Ηχεία
Audio
- Configuration
- 2 x 6.5" in-wall LCR speaker
- Tweeter type / diameter
- Swivel / 1" (25mm)
- Woofer diameter
- 6.5"
- Impedance (nominal)
- 8 ohms
- Sensitivity (2.83V, 1m)
- 87 dB SPL (switchable HF)
- Low frequency response (-3 dB)
- 65 Hz
- Power handling (program)
- 15 - 100W
Physical
- Max rear depth
- 85 mm
- Grille size (round / square)
- 511 mm x 221 mm
- Cutout (nominal)
- 483 mm x 193 mm
- Grille type
- Low-profile magnetic
- Mounting
- In-wall
Drivers
- Low frequency driver cone
- Nano Particle mass damped polypropylene
- Tweeter dome
- Silk, mesh protected
- Tweeter adjustment
- Swivel, with HF level adjustment
- Crossover
- High order