JS3
The JS3 is a passive three-way microphone splitter that sends one mic signal to three destinations at once, using two transformer-isolated outputs and one direct output. It suits live sound, monitor and recording setups where one source must feed several mixers.
- Passive 3-way balanced mic splitter
- One direct output plus two transformer-isolated outputs
- Jensen transformer for isolation and low distortion
- Output ground lifts to reduce hum and buzz
- Input pad allows line-level sources
- Rack mountable; up to eight in a Radial J-Rak
Φωτογραφίες
7Αγγελίες
Δεν υπάρχουν ακόμα αγγελίες για αυτό το μοντέλο
Όταν κάποιος πουλήσει ένα JS3, οι αγγελίες και το ιστορικό πωλήσεων θα εμφανίζονται εδώ.
Πούλησε ένα τέτοιοΠεριγραφή
The JS3 takes a single balanced microphone signal on an XLR input and distributes it to three outputs without active electronics. One output is a direct feed, and the other two pass through a Jensen transformer for galvanic isolation, which breaks ground loops and removes the hum and buzz they cause. The transformer is described as offering a very wide bandwidth with very low distortion and phase shift.
Ground lifts on the outputs give further control over noise, and an input pad lets line-level sources be connected as well as microphones. A typical use is feeding a main mixer, stage monitors and a recorder from the same microphone at the same time.
The JS3 can be rack mounted for touring or installation. Up to eight units fit in the Radial J-Rak, and the related J-Rak 4, J-Rak 8, J-Clamp and TrainTrack Plus accessories cover rack, desktop and pedalboard mounting.
Βίντεο
Προδιαγραφές
- Μάρκα
- Radial Engineering
- Μοντέλο
- JS3
- Κατηγορία
- Live ήχος › Άλλος εξοπλισμός live
Inputs
- Input connector
- XLR
- Input pad
- Yes, allows line-level sources
- Input type
- Balanced microphone signal
Outputs
- Number of outputs
- 3
- Direct output
- 1
- Transformer-isolated outputs
- 2
- Output ground lifts
- Yes
Audio
- Splitter type
- Passive 3-way microphone splitter
- Transformer
- Jensen
- Isolation
- Galvanic isolation on isolated outputs
- Ground loop noise
- Eliminates hum and buzz caused by ground loops
Physical
- Rack mounting
- Up to 8 in the Radial J-Rak
- Compatible rack adapters
- J-Rak 4, J-Rak 8
- Desktop/rack flange mount
- J-Clamp
- Pedalboard mounting
- TrainTrack Plus brackets
General
- Manufacturer
- Radial Engineering
- Part number
- R800 1023 00
- Power
- Passive (no power required)