SPL Performer s1200
Analog stereo power amplifier rated at 2 x 520 W into 4 Ω, built around SPL's VOLTAiR ±60 V input-stage technology. It suits hi-fi and studio users who need a high-power amp with XLR and RCA inputs, input trim and magnetic decorative panels.
- 2 x 520 W into 4 Ω; 2 x 300 W into 8 Ω; 2 x 550 W into 2 Ω
- Analog class-AB design with VOLTAiR ±60 V input stage
- Balanced XLR and unbalanced RCA inputs, switchable
- Input trim 0 to -5.5 dB in 0.5 dB steps
- Magnetic decorative panels; 12 V trigger and AMP CTL standby
Φωτογραφίες
8Αγγελίες
Δεν υπάρχουν ακόμα αγγελίες για αυτό το μοντέλο
Όταν κάποιος πουλήσει ένα SPL Performer s1200, οι αγγελίες και το ιστορικό πωλήσεων θα εμφανίζονται εδώ.
Πούλησε ένα τέτοιοΠεριγραφή
The Performer s1200 is a fully analog class-AB stereo power amplifier. It delivers 2 x 300 W into 8 Ω, 2 x 520 W into 4 Ω and 2 x 550 W into 2 Ω. Voltage and power amplification are separate stages, each with its own negative feedback path, so speaker feedback does not reach the input stage. The input stage runs on SPL's ±60 V VOLTAiR technology, and the power stage on ±80 V from a linear supply with a toroidal transformer.
The amplifier has balanced XLR and unbalanced RCA inputs, selected with a switch on the rear panel. Input sensitivity can be trimmed from 0 dB to -5.5 dB in 0.5 dB steps. Protection circuits cover DC voltage and overheating, with Protect and TEMP LEDs. Cooling is mostly passive through large heat sinks, with six processor-controlled fans as backup. Three base colours (black, red, silver) are available, and magnetic decorative panels in black, red and silver are supplied.
Speaker outputs are screw-type binding posts that take banana plugs or bare wire up to 4 mm. Standby can be switched through the AMP CTL 3.5 mm jack, for example from the Director Mk2, or through a 12 V trigger input from third-party preamps. The unit is made in Germany and is not recommended for speakers below 2 Ω.
Βίντεο
Προδιαγραφές
- Μάρκα
- SPL
- Μοντέλο
- Performer s1200
- Κατηγορία
- Hi-Fi και οικιακός ήχος › Ενισχυτές
Inputs
- Analog inputs
- XLR (balanced), RCA (unbalanced)
- Input impedance
- 20 kΩ
- Input sensitivity
- 12,5 dBu
- Input trimming
- 0 dB to -5.5 dB in 0.5 dB steps
Outputs
- Loudspeaker outputs
- Binding posts with 4 mm ø cable hole (screwable) and banana plug
- Output power (RMS, 2 Ω)
- 2 x 550 W
- Output power (RMS, 4 Ω)
- 2 x 520 W
- Output power (RMS, 8 Ω)
- 2 x 300 W
- Output voltage (Peak-to-Peak)
- 160 V
- Output voltage (RMS)
- 54,6 V
Audio
- Harmonic distortion (1 kHz, 2 Ω)
- < 0,09 %
- Harmonic distortion (1 kHz, 4 Ω)
- < 0,09 %
- Harmonic distortion (1 kHz, 8 Ω)
- < 0,04 %
- Output impedance (20 Hz – 20 kHz)
- < 0,031 Ω
- Frequency range (-3dB)
- 10 Hz – 80 kHz
- Amplification gain
- 26 dB
- Damping factor (1 kHz, 8 Ω)
- > 290
- Noise (A-weighted)
- -123 dB
Power
- Power supply capacity
- 70,000 µF
- Toroidal transformer
- 1440 VA
- Operating voltage (input stage)
- +/- 60 V
- Operating voltage (power stage)
- +/- 80 V
- Mains voltage
- 230 V AC / 50 Hz; 115 V AC / 60 Hz (selectable)
- Power consumption
- max. 1440 VA
- Idle power consumption
- 50 W
- Stand-by power consumption
- < 0.3 W
Physical
- Dimensions (W x H x D)
- 276 x 205 x 345 mm (10.94 x 8.07 x 13.6 inch)
- Unit weight
- 25.1 kg (55.3 lbs)
- Shipping weight
- 29.1 kg (64.2 lbs)