Deco V2
Deco V2 is a compact stereo pedal that combines tape saturation with a two-deck doubletracker for slapback, chorus, flanging and echo effects. It is aimed at guitarists, and at studio users via a Studio Mode with extra headroom, and adds MIDI control and presets.
- Tape saturation plus two-deck doubletracker in one pedal
- Classic reel-to-reel and cassette (ALC) voicings
- Lag Time from -.3 ms flange up to 500 ms tape echo
- Full MIDI over EXP/MIDI jack or USB-C, 300 presets
- Relay true bypass or buffered bypass
- Mono or stereo input, stereo outputs, Studio Mode +10dB
Φωτογραφίες
8Αγγελίες
Δεν υπάρχουν ακόμα αγγελίες για αυτό το μοντέλο
Όταν κάποιος πουλήσει ένα Deco V2, οι αγγελίες και το ιστορικό πωλήσεων θα εμφανίζονται εδώ.
Πούλησε ένα τέτοιοΠεριγραφή
Deco V2 pairs a tape saturation section with a doubletracker. The saturation side covers light tape compression through to gentle tape-style overdrive, with Saturation, Tone and Volume controls and a Voice switch that selects a classic reel-to-reel response or a compressed cassette character. The doubletracker mixes a reference deck with a lag deck. Lag Time spans flanging, chorus, slapback and tape echo ranges, while Blend, Wobble and a Blend Type switch (sum, invert, bounce) shape the result.
Additional functions include a Wide Stereo mode, a hold-to-engage Auto-Flange through-zero effect on the Doubletracker footswitch, a selectable relay-based true bypass or buffered bypass, and a Studio Mode that adds 10dB of headroom for bass, synths and keyboards. The input uses a discrete Class A JFET stage, and processing runs on an ARM chip.
A TRS input with a rear mono/stereo switch feeds two TS outputs. The EXP/MIDI jack and USB-C port accept MIDI, with Lag Time sync to MIDI Clock and 300 preset locations. The pedal runs from a 9V DC supply, which is sold separately.
Βίντεο
Προδιαγραφές
- Μάρκα
- Strymon
- Μοντέλο
- Deco V2
- Κατηγορία
- Εφέ και πετάλια
Inputs
- Audio input
- High impedance ultra low-noise discrete Class A JFET TRS stereo input
- Input switch
- Mono (TS) or Stereo (TRS)
- Audio input impedance
- 1M Ohm
- Expression / MIDI input
- EXP/MIDI jack for TRS expression pedal, MiniSwitch, MultiSwitch Plus or TRS MIDI
Outputs
- Audio outputs
- Low impedance independent TS stereo outputs (Out L, Out R)
- Audio output impedance
- 100 Ohm
Connectivity
- USB
- USB-C for MIDI from a computer and firmware updates
- MIDI preset locations
- 300
- MIDI Clock Sync
- Lag Deck delay time, saved per preset
Audio
- Converters
- 24-bit 96kHz A/D and D/A
- Processor
- 520MHz ARM Superscalar
- Processing
- 32-bit floating point
- Frequency response
- 20Hz to 20kHz
- Bypass
- Electromechanical relay true bypass (default) or buffered bypass
- Voice
- Classic or cassette
- Blend Type
- Sum, invert or bounce
- Studio Mode headroom
- 10dB added
Controls
- Footswitches
- Tape Saturation On/Off and Doubletracker On/Off
Power
- Power requirement
- 9V DC, center negative, 300mA minimum (power supply not included)
Physical
- Dimensions (D x W x H)
- 4.5" (11.43 cm) x 4" (10.16 cm) x 2.4" (6.1 cm)
- Chassis
- Anodized silver aluminum
- Origin
- Designed and built in the USA