TM 1600
Compact half-track quarter-inch reel-to-reel tape machine with three motors, built with the Düsseldorf specialist Ballfinger. It takes reels up to 10.5 inches at 19 or 38 cm/s and suits analogue enthusiasts wanting a tape deck in a small, low-profile body.
- 2-track (half-track) quarter-inch playback
- 19 and 38 cm/s tape speeds
- Reels up to 10.5 inches
- Three motors, new tape path geometry
- Selectable CCIR or NAB equalization
- Drive only 50 mm high; optional wall mounting
Φωτογραφίες
6Αγγελίες
Δεν υπάρχουν ακόμα αγγελίες για αυτό το μοντέλο
Όταν κάποιος πουλήσει ένα TM 1600, οι αγγελίες και το ιστορικό πωλήσεων θα εμφανίζονται εδώ.
Πούλησε ένα τέτοιοΠεριγραφή
The TM 1600 is a two-track (half-track) quarter-inch tape machine that plays reels up to 10.5" at 19 or 38 cm/s. It uses three motors and a newly developed tape path geometry. CCIR equalization, common for European recordings, and NAB equalization, used for American and Asian recordings, can be selected. An edit function allows single-handed operation.
The drive was developed with Ballfinger and is very compact, only 50 mm high, which gives more freedom in how the machine is built into a setup. The head motor and capstan motor sit far apart from each other, a layout intended to give a very high signal-to-noise ratio. A real-time digital counter shows hours, minutes, seconds and hundredths of a second.
The power supply is external, which reduces interference in the machine. Wall mounting is available as an option. A datasheet is offered for download from the maker.
Βίντεο
Προδιαγραφές
- Μάρκα
- Thorens
- Μοντέλο
- TM 1600
- Κατηγορία
- Δίσκοι › Κασέτες
Audio
- Track format
- 2-track (half track), quarter inch
- Tape speeds
- 19 and 38 cm/s
- Equalization
- CCIR or NAB, selectable
- Signal-to-noise design
- Head and capstan motor placed far apart for very high signal to noise ratio
Transport
- Reel size
- Up to 10.5"
- Motors
- 3
- Tape path
- Newly developed geometry
- Drive
- Very compact, developed with Ballfinger
- Edit function
- Integrated, single-handed operation
Display
- Counter
- Real-time digital counter
- Counter format
- Hour / Minute / Second / Second/100
Power
- Power supply
- External, for reduced interference
Physical
- Drive height
- 50 mm
- Mounting
- Optional wall mounting
Software
- Downloads
- Datasheet TM 1600